===========================================================================
Universal RAID Utility Ver2.0 (Windows Edition)
===========================================================================
[Software name ] Universal RAID Utility Ver2.01
[Registered name ] uraidutl_201r992.zip
[Copyright (C) ] NEC Corporation 2009
[Applicable model] Express5800/R120a-1, R120a-2, T120a-M, T120a-E, B120a
[Users ] For users who will install Windows and who will use the
following RAID Controllers on NEC Express5800 series.
- Onboard RAID Controller on NEC Express5800/R120a-1,
T120a-E
- Internal RAID Controller on NEC Express5800/R120a-1,
R120a-2, T120a-M, T120a-E
- N8103-109 RAID Controller (128 MB, RAID 0/1/5/6)
- N8103-115 RAID Controller (512 MB, RAID 0/1/5/6)
- N8103-116 RAID Controller (128 MB, RAID 0/1)
- N8103-117 RAID Controller (128 MB, RAID 0/1/5/6)
- N8103-118 RAID Controller (256 MB, RAID 0/1/5/6)
- N8103-116A RAID Controller (128 MB, RAID 0/1)
- N8103-117A RAID Controller (128 MB, RAID 0/1/5/6)
- N8103-118A RAID Controller (256 MB, RAID 0/1/5/6)
- N8403-026 RAID Controller
- N8403-027 SATA Interface Card(When using for RAID System)
[Software type ] Utility
[Creation method ] Windows Zip format
===========================================================================
[Software Introduction]
Universal RAID Utility (hereinafter called "this software") is RAID System
Management Utility for the following RAID Controllers.
- Onboard RAID Controller on NEC Express5800/R120a-1,
T120a-E
- Internal RAID Controller on NEC Express5800/R120a-1,
R120a-2, T120a-M, T120a-E
- N8103-109 RAID Controller (128 MB, RAID 0/1/5/6)
- N8103-115 RAID Controller (512 MB, RAID 0/1/5/6)
- N8103-116 RAID Controller (128 MB, RAID 0/1)
- N8103-117 RAID Controller (128 MB, RAID 0/1/5/6)
- N8103-118 RAID Controller (256 MB, RAID 0/1/5/6)
- N8103-116A RAID Controller (128 MB, RAID 0/1)
- N8103-117A RAID Controller (128 MB, RAID 0/1/5/6)
- N8103-118A RAID Controller (256 MB, RAID 0/1/5/6)
- N8403-026 RAID Controller
- N8403-027 SATA Interface Card(When using for RAID System)
Please be sure to install NEC ESMPRO Agent ESMDiskArray (hereinafter called
"ESMDiskArray") first and then install Universal RAID Utility. Otherwise
the alert notifications of Universal RAID Utility will not be correctly
logged. Please refer to the [Universal RAID Utility NEC ESMPRO Update
Setup Procedure] for the detailed procedure of the installation.
Carefully read the following user license agreement for NEC software
before using this software.
If you do not agree to the terms of the agreement, do not download this
software. By downloading this software, you agree to be bound by the terms
of the agreement.
[User license agreement for NEC software]
This user license agreement is an agreement between you and NEC Corporation
(hereinafter called "NEC").
Under the following terms of this agreement, NEC grants you the right to
use the software program (hereinafter called "licensed program"), and you
are to agree to the terms. You are to take responsibilities for the choice,
installation, or use of the licensed program, or the results of the usage
of the usage of the licensed program.
1. Term
(1) This user license agreement goes into effect on the day you receive
this software product.
(2) You may terminate the right to use the licensed program under this
license agreement at any time by giving NEC a month's or longer notice
by letter.
(3) NEC may terminate your right to use the licensed program at any time,
if you fail to comply with the terms of this user license agreement.
(4) Your right to use the licensed program continues to exist until it
terminates in accordance with the provisions of this user license
agreement.
(5) When your right to use the licensed program terminates, all of your
other rights under this user license agreement also terminate. You must
destroy the licensed program, all the copies of the licensed program,
and the related documents (e.g., manuals) provided with the licensed
program as soon as your right to use the licensed program terminates.
2. Use right
You may use the licensed program only on NEC Express5800 servers using your
Windows.
3. Copy, alteration, and linkage of the licensed program
(1) You may make a copy of the licensed program only to use it as a backup
copy in case the program data is lost or destroyed. However, this is
not the case if the licensed program is installed in fixed storage.
In this case, you may keep it only to use in case the storage medium of
the licensed program is lost or destroyed.
(2) You must give the expressions of the copyright of the licensed program
and other rights to all the copies of the licensed program.
(3) Unless otherwise specified in this user license agreement, you may not
use, copy, alter, or link the licensed program, you may not reproduce
it in publications or networks, or you may not make your own decision
on handling it in any other ways.
(4) You may not copy the related documents (e.g., manuals) provided with
the licensed program or reproduce them in publications or networks
under any circumstances.
(5) This user license agreement is not to transfer the intellectual
property for the licensed program to you.
4. Transfer of the licensed program
(1) You may transfer all of your rights under this user license agreement
only if satisfying all the following condition:
(a) You are to transfer this user license agreement, the licensed program,
all the copies of the licensed program, and the related documents
(e.g., manuals) provided with the licensed program, and retain none of
them.
(b) The recipient agrees to the terms of this user license agreement.
(2) Unless otherwise specified in this user license agreement, you may not
loan or transfer the licensed program or the right to use it to a third
party, or you may not make your own decision on handling it in any
other ways.
5. Decompilation
You may not reverse engineer, decompile, or disassemble the licensed program.
6. Term of a guarantee
(1) NEC does not give any guarantee for the licensed program. You are to be
liable and to pay for problems arising from the use of the licensed
program.
(2) Irrespective of the term (1), when NEC corrects licensed-program errors
(bugs), NEC may, at its discretion, provide an error-corrected program,
a program for correction (hereinafter called a modification program),
or information for correction by an NEC-decided method. The modification
program provided to you is regarded as the licensed program.
7. No liability
NEC assumes no liability for your lost profit, damages arising from
special circumstances (including damages which NEC can or could foresee),
or damages you are asked for by any third party.
8. Others
Disputes over this user license agreement are to be settled at the Tokyo
District Court as the exclusively agreed competent court.
---------------------------------------------------------------------------
[Installation Procedure]
Please extract the installation image and then start installation.
Refer to the "Universal RAID Utility Ver2.0 User's Guide" which is contained
in the installation image for the detailed procedure of the installation.
(1) Download the archive "uraidutl_201r992.zip".
(2) Copy the archive to any folder in the server in which this software
will be installed.
(3) The archive "uraidutl_201r992.zip" is in the Windows ZIP format.
After extracting the archive, the following files will appear.
Universal RAID Utility Ver2.01 Installation Image
Setup.exe - Universal RAID Utility Setup Program
URU20UGE.pdf - Universal RAID Utility Ver2.0 User's Guide
(4) To install this software, please refer the section [Installation and
Uninstallation (Windows)] in Universal RAID Utility Ver2.0 User's Guide.
Log on with administrator permission and run Setup.exe.
[General Notice]
(1) The order of installation: NEC ESMPRO ESMDiskArray
This software works in cooperation with ESMDiskArray Ver 1.50 or later.
For the cooperation with ESMDiskArray, it is necessary to install
ESMDiskArray before installing this software.
If you mistake the order, the extra alert notification or no alert
notification may be sent. Please install ESMDiskArray and this software
in the correct order.
[Revision History]
2009/5/29 Ver2.01 Rev992
Universal RAID Utility Ver2.01 provides the following enhancements:
1. Addition of managed hardware
SAMSUNG SSD support.
2. Display of information
- RAID Viewer and raidcmd do not display [Interface] when the value of
[Interface] is [Unknown]
- The order of event notification regarding Physical Device connected to
LSI RAID Controller has been changed.
When the status of Physical Device is "Unconfigured Bad", which means
that the status of the Physical Device not configured to an Array
becomes bad, Universal RAID Utility registers the event to OS log and
alerts to NEC ESMPRO Manager.
[Attached Files]
date size filename
-------------------+----------------+---------------------------------
2009/02/24 17:09 16,889,264 Setup.exe
2009/05/19 17:14 2,857,499 URU20UGE.pdf
---------------------------------------------------------------------------
[ Trademarks and Copyright ]
The copyright for this software is held by NEC.
*Microsoft, Windows and Windows Server are registered trademark of US
Microsoft Corporation in the United States and other countries.
*All other company and product names in this document are the registered
trademark or trademark of their respective owners.
---------------------------------------------------------------------------
Copyright NEC Corporation 2009