================================================================================
(( Windows 2000(R) Device Driver/Utility for mirroring controller(N8503-51F) ))
================================================================================
[ Software name ] Device Driver/Utility for mirroring controller(N8503-51F)
[ Registered name ] FT66DRV.EXE / FT66UTL.EXE
[ Copyright (C) ] NEC Corporation
[ Applicable models ] NEC Express5800/110Ec, 110Ed2
[ Users ] Customers who use mirroring controller with Windows(R) 2000
on an NEC Express5800/110Ec and 110Ed2 computer
[ Software type ] Driver / Utility
[ Creation method ] Self-extract
--------------------------------------------------------------------------------
[ Software introduction ]
The "Device Driver/Utility for mirroring controller(N8503-51F)" supports
Windows(R) 2000 installation on an NEC Express5800/100 Series computer.
Carefully read the following user license agreement for NEC software before
using this software. If you do not agree to the terms of the agreement, do not
download this software. By downloading this software, you agree to be bound by
the terms of the agreement.
[ User license agreement for NEC software ]
This user license agreement is an agreement between you and NEC Corporation
(hereinafter called "NEC"). Under the following terms of this agreement, NEC
grants you the right to use the software program (hereinafter called "licensed
program"), and you are to agree to the terms. You are to take responsibilities
for the choice, installation, or use of the licensed program, or the results of
the usage of the licensed program.
1. Term
(1) This user license agreement goes into effect on the day you receive this
software product.
(2) You may terminate the right to use the licensed program under this user
license agreement at any time by giving NEC a month's or longer notice by
letter.
(3) NEC may terminate your right to use the licensed program at any time if you
fail to comply with the terms of this user license agreement.
(4) Your right to use the licensed program continues to exist until it
terminates in accordance with the provisions of this user license agreement.
(5) When your right to use the licensed program terminates, all of your other
rights under this user license agreement also terminate. You must destroy
the licensed program, all the copies of the licensed program, and the
related documents (e.g., manuals) provided with the licensed program as
soon as your right to use the licensed program terminates.
2. Use right
You may use the licensed program only on NEC Express5800 servers (NEC
Express5800/100 Series) using your Microsoft Windows 2000.
3. Copy, alteration, and linkage of the licensed program
(1) You may make a copy of the licensed program only to use it as a backup copy
in case program data is lost or destroyed. However, this is not the case if
the licensed program is installed in fixed storage. In this case, you may
keep it only to use in case the storage medium of the licensed program is
lost or destroyed.
(2) You must give the expressions of the copyright of the licensed program and
other rights to all the copies of the licensed program.
(3) Unless otherwise specified in this user license agreement, you may not use,
copy, alter, or link the licensed program, you may not reproduce it in
publications or networks, or you may not make your own decision on handling
it in any other ways.
(4) You may not copy the related documents (e.g., manuals) provided with the
licensed program or reproduce them in publications or networks under any
circumstances.
(5) This user license agreement is not to transfer the intellectual property
for the licensed program to you.
4. Transfer of the licensed program
(1) You may transfer all of your rights under this user license agreement only
if satisfying all the following condition:
(a) You are to transfer this user license agreement, the licensed program,
all the copies of the licensed program, and the related documents
(e.g., manuals) provided with the licensed program, and retain none of
them.
(b) The recipient agrees to the terms of this user license agreement.
(2) Unless otherwise specified in this user license agreement, you may not loan
or transfer the licensed program or the right to use it to a third party,
or you may not make your own decision on handling it in any other ways.
5. Decompilation
You may not reverse engineer, decompile, or disassemble the licensed program.
6. Term of a guarantee
(1) NEC does not give any guarantee for the licensed program. You are to be
liable and to pay for problems arising from the use of the licensed program.
(2) Irrespective of the term (1), when NEC corrects licensed-program errors
(bugs), NEC may, at its discretion, provide an error-corrected program,
a program for correction (hereinafter called a modification program), or
information for correction by an NEC-decided method. The modification
program provided to you is regarded as the licensed program.
7. No liability
NEC assumes no liability for your lost profit, damages arising from special
circumstances (including damages which NEC can or could foresee), or damages
you are asked for by any third party.
8. Others
Disputes over this user license agreement are to be settled at the Tokyo
District Court as the exclusively agreed competent court.
================================================================================
Device Driver for mirroring controller
================================================================================
Use the following procedure to extract and install this software.
[ Extract procedure ]
(1) Download FT66DRV.EXE to a suitable location on your hard disk.
(2) Click the [Start] button and then click [Run...].
(3) Enter the full pathname (such as C:¥TEMP¥FT66DRV.EXE) of the downloaded
FT66DRV.EXE in the Name field and then click the [OK] button.
(4) Enter the folder name of the module extraction destination and click the
[Unzip] button.
(5) When the message (" 6 file(s) unzipped successfully " )is displayed,click
on [OK].This floppy disk is " N8503-51F Disk Mirroring Controller Promise
FASTTRAK66 Driver".
To see the explanation file (FT66DRV.txt), use "Notepad" of Windows. Install
the device driver according to the contents of the installation procedure notes
(FT66DRV.txt). When reading these notes, replace the drive names and folder
names with suitable names that match your environment.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
[ Notes Concerning Windows 2000 Installation ]
(1) When you use the only following model,you can install Windows2000 on this
board.( Present on July 31,2000)
- Express5800/110Ec
- Express5800/110Ed2
(2) When you install mirroring controller, you cannot use power management
function (Sleep and Hibernation).
(3) When you move this board to other PCI slot position, a popup message
([Found New Hardware])is appeared. Please install the driver again by
following procedure.
[1] When the dialog [Digital Signature Not Found] is displayed,
click on [Yes].
[2] When the following message is displayed, click on [OK].Insert
"N8503-51F Disk Mirroring Controller Promise FASTTRAK66 Driver " into
the floppy drive, and appoint housing place of driver in[A:¥WIN2000].
Please insert the Compact Disc labeled'Promise FastTrack Family Driver
Didkette'into your CD-ROM drive[D:]and then click OK.
You Can also click OK if you want files to be coppied from an alternate
location,such as a floppy disk or a network server.
[3] Driver copy comes to an end,Dialog [Completing the Found New Hardware
Wizard] is indicated.
[4] When the following message is displayed,restart system.
You must restart your computer before the new settings will take
effect. Do you want to restart your computer now?
================================================================================
Utility for mirroring controller
================================================================================
Use the following procedure to extract and install this software.
[ Extract procedure ]
(1) Download FT66UTL.EXE to a suitable location on your hard disk.
(2) Click the [Start] button and then click [Run...].
(3) Enter the full pathname (such as C:¥TEMP¥FT66UTL.EXE) of the downloaded
FT66UTL.EXE in the Name field and then click the [OK] button.
(4) Enter the folder name of the module extraction destination and click the
[Unzip] button.
(5) When the message " 18 file(s) unzipped successfully " is displayed,click on
[OK].This floppy disk is " N8503-51F Disk Mirroring Controller Promise
FASTTRAK66 Utility ".
To see the explanation file (FT66Utl.txt), use "Notepad" of Windows.
Install the utility according to the contents of the installation procedure
notes (FT66Utl.txt). When reading these notes, replace the drive names and
folder names with suitable names that match your environment.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
[ Trademarks and copyright ]
The copyright for this software is held by NEC.
* Microsoft and Windows 2000 are registered trademarks of Microsoft Corporation
in the U.S.A. and other countries.
* All other product, brand, company or trade names are trademarks or registered
trademarks of their respective owners.
Copyright NEC Corporation 2000
--------------------------------------------------------------------------------