Please note that JavaScript and style sheet are used in this website,
Due to unadaptability of the style sheet with the browser used in your computer, pages may not look as original.
Even in such a case, however, the contents can be used safely.
DTL-10 Series ：
Low/Medium-Power Digital UHF TV Transmitter
Specifications and Performance (DVB-T)
| INPUT | REMOTE CONTROL | |||
| ASI Input | 4 x DVB ASI, 270Mbps Serial 75Ω BNC (2 for HP, 2 for LP) |
|
Remote | Parallel: status/alarm/command; serial: RS485, 15pin HD-D-sub female |
| Reference | 10MHz, 0dBm ±3dB, 50Ω BNC (N/A when internal GPS receiver exists) |
RS-232C | RS232C, 9pin D-sub male | |
| 1pps Input (GPS ANT Input) | 1Hz, TTL level, 50Ω BNC (when optional internal GPS receiver is employed, this input is used for GPS ANT input, 50Ω TNC-female) | Ethernet | TCP/IP 100BASE-TX/10BASE-T UDP/IP for SNMP |
|
| DVB-T RF Signal (for Re-transmitter) | RF: Band III, IV, V, -20dBm to -75dBm, 50Ω BNC (there are two RF inputs for antenna diversity type) |
|||
| INPUT | REMOTE CONTROL | |||
| RF OUT | 50Ω N female: 30W/50W/100W/200W 50Ω 7/16 DIN female: 200W(N) to 1.6kW 50Ω 1-5/8” EIA-UF: with Filter & Rack option (without output BPF) IMP <= -36dB, MER >= 32dB Exciter output: +10dBm, 50Ω BNC Frequency stability: <= ±1x10-7 (without external reference) |
|
Power Supply | 200/208/220/230V, single-phase, 3-wire AC mains of DLP240-S PA is 3 phases, 4 wire as standard, also possible to operate with single phase |
| RF Monitor | More than 0dBm, 50Ω BNC | Voltage Fluctuation | ±15% | |
| Local Monitor | Center frequency of RF output, 0dBm, CW, 50Ω BNC |
Power Supply Frequency | 50/60Hz ±2% | |
| Ambient Temperature | 0° to +45° | |||
| Relative Humidity | <= 90% | |||
Dimensions & Weight
| Component | Size WxDxH (mm) | Weight (kg) | |
| Exciter | DM-3000 | 480 x 520 x 44 (1U) | Approx 8 |
| PA | DLP30 | 480 x 500 x 88.1 (2U) | 13 |
| DLP60 | 480 x 500 x 132.6 (3U) | 16 | |
| DLP120 | 18 | ||
| DLP240-S | 480 x 500 x 170 (4U) | 23 | |
Datasheet
