| Express5800/T120d | |
| Distribution | CentOS 5.7 (x86/x86_64) ( KERNEL 2.6.18-274.el5 ) |
| Meanings of letters |
| A ---Function without third party drivers B ---Function with third party drivers C ---Not function D ---Not supported blank---Not tested |
| OS Installation / Basic operation / Hardware addition / Backup Devices |
| Model | UP |
| Code | Model |
|---|---|
N8100-1874Y N8100-1875Y N8100-1876Y N8100-1877Y N8100-1878Y |
Express5800/T120d Intel® Xeon® Processor E5-2403 (1.80,4C/4T) Intel® Xeon® Processor E5-2407 (2.20,4C/4T) Intel® Xeon® Processor E5-2420 (1.90,6C/12T) Intel® Xeon® Processor E5-2430 (2.20,6C/12T) Intel® Xeon® Processor E5-2470 (2.30,8C/16T) |
| OS Installation | UP |
-Hardware configuration
| Configuration | Drive | Outline |
|---|---|---|
| 1 | LSI RAID 2.5/3.5-inch drive |
N8103-149 RAID Controller(512MB, RAID0/1) Additional HDD |
| 2 | LSI RAID 2.5/3.5-inch drive |
N8103-150 RAID Controller(512MB, RAID0/1/5/6) Additional HDD |
| 3 | LSI RAID 2.5/3.5-inch drive |
N8103-151 RAID Controller(1GB, RAID0/1/5/6) Additional HDD |
| 4 | SATA SSD/HDD 2.5/3.5-inch drive |
Additional HDD |
| Checklist | Result | Comment | |
|---|---|---|---|
| Conf1,2,3 | Conf4 | ||
| OS installation | A (*1) |
A (*1) |
Boot from distribution's CD/DVD media. |
| Making partitions | 14 | 14 | Using the whole drive |
| Hard Drives | A | A | Copy and compare data files. |
| Availability of Degraded RAID | A | D | I/O access, reboot |
| Rebuild of Degraded RAID | A | D | I/O access, reboot |
| I/O access running | 12h | 12h | The running time |
| Reboot | 10 | 10 | The number of times. |
(*1)
Please apply the KMP modules.
Driver Current Updated megaraid_sas 00.00.05.38-rh1 00.00.05.38n-rh1 tg3 3.116 3.120h
- Extract this file and change to following directory.
# cd RHEL5_x86/driver ( if x86 system )
# cd RHEL5_EM64T/driver ( if x86_64 system )
- Install KMP packages.
In case Kernel version is 2.6.18-274.el5
# rpm -ivh --nodeps --nosignature megaraid_sas/kmod-megaraid_sas-00.00.05.38n*.rpm
# rpm -ivh --nodeps --nosignature tg3/kmod-tg3-3.120h*.rpm
In case Kernel version is 2.6.18-274.el5PAE
# rpm -ivh --nodeps --nosignature */*-PAE-*.rpm
- Install KMP common packages.
# rpm -ivh --nodeps --nosignature */*noarch.rpm
- Restart the Operating System.
| Basic operation | UP |
| Checklist | Result | Comment |
|---|---|---|
| X Window System | A | 1024x768, thousands colors. |
| PS/2 Mouse/keyboard | A | Test on X Window System. |
| Built-in LAN ports | A | ssh and ftp |
| Built-in LAN ports Teaming (bonding) | A | Use bonding driver. See the kernel document about bonding. |
| CPU information | A | cat /proc/cpuinfo |
| Memory information | A | cat /proc/meminfo |
| Physical CPUs. | 2 | Physical CPUs. |
| Main memory size | 192 | Tested size. (GB) |
| Optical disk drive | A | Copy and compare data files. |
| Floppy drive | A | |
| Serial port | A | Configure to login. |
| Remote Management | A | EXPRESSSCOPE Engine (Integrated remote media and KVM over IP) *You need a license key for these functions. |
| Hardware Addition | UP |
| Model/Device | Result | |
|---|---|---|
| Hard drive (HDD) | 2.5inch SAS/SATA HDD | A |
| 2.5inch SAS/SATA SSD | A | |
| 3.5inch SATA HDD | A | |
| Backup devices | (*1) | |
| LAN Adapters | (*1) | |
(*1)
See ( HERE ), Option Devices page.
| Backup Devices | UP |
-Hardware configuration
| Connection | Code | Model/Device | Driver |
|---|---|---|---|
| Conn1 | N8103-107 | Additional SCSI Controller (U320) | aic79xx |
| Conn2 | - | USB controller (USB2.0) | - |
| Conn3 | N8103-104A | Additional SAS Controller (PCIe x8) | mptsas |
| Checklist | Result | Comment | ||
|---|---|---|---|---|
| Conn1 | Conn2 | Conn3 | ||
| Backup, Restore | A | A | A | tar command |
| Reboot | 5 | 5 | 5 | The number of times. |
| go back | UP |