| Express5800/iR120a-1E | |
| Distribution | FreeBSD 7.2-RELEASE (i386/amd64) |
| Meanings of letters |
| A ---Function without third party drivers B ---Function with third party drivers C ---Not function D ---Not supported blank---Not tested |
| OS Installation / Basic operation / Hardware addition |
| Model | UP |
| Code | Model |
|---|---|
N8100-1575Y N8100-1576Y N8100-1577Y |
Express5800/iR120a-1E 2.5inch disk model ( diskless model) QuadCore Intel®Xeon®Processor E5504 2 GHz QuadCore Intel®Xeon®Processor L5520 2.26 GHz QuadCore Intel®Xeon®Processor L5506 2.13 GHz |
N8100-1578Y N8100-1579Y N8100-1580Y |
Express5800/iR120a-1E 3.5inch disk model ( diskless model) QuadCore Intel®Xeon®Processor E5504 2 GHz QuadCore Intel®Xeon®Processor L5520 2.26 GHz QuadCore Intel®Xeon®Processor L5506 2.13 GHz |
| OS Installation | UP |
-Hardware configuration
| Configuration | Drive | Outline | qty |
|---|---|---|---|
| 1 | 2.5inch disk model SATA/SSD |
Additional HDD | 6 |
| 2 | 3.5inch disk model SATA |
Additional HDD | 4 |
| 3 | 2.5inch disk model SATA/SSD/SAS-DAC RAID1 |
N8103-116A/N8103-118A Disk Array Controller (for internal SATA/SAS HDDs) | 1 |
| Additional HDD (RAID1) | 2 | ||
| 4 | 3.5inch disk model SATA-DAC RAID1 |
N8103-116A/N8103-118A Disk Array Controller (for internal SATA/SAS HDDs) | 1 |
| Additional HDD (RAID1) | 2 | ||
| 5 | 2.5inch disk model SATA/SSD/SAS-DAC RAID5 |
N8103-117A/N8103-118A Disk Array Controller (for internal SATA/SAS HDDs) | 1 |
| Additional HDD (RAID5) | 3 | ||
| 6 | 3.5inch disk model SATA-DAC RAID5 |
N8103-117A/N8103-118A Disk Array Controller (for internal SATA/SAS HDDs) | 1 |
| Additional HDD (RAID5) | 3 | ||
| 7 | 2.5inch disk model SATA/SSD/SAS-DAC RAID6 |
N8103-117A/N8103-118A Disk Array Controller (for internal SATA/SAS HDDs) | 1 |
| Additional HDD (RAID6) | 4 | ||
| 8 | 3.5inch disk model SATA-DAC RAID6 |
N8103-117A/N8103-118A Disk Array Controller (for internal SATA/SAS HDDs) | 1 |
| Additional HDD (RAID6) | 4 |
| Checklist | Result | Comment | |
|---|---|---|---|
| Conf1,2 | Conf3,4,5,6,7,8 | ||
| OS installation | A | A | Boot from distribution's DVD media. |
| Making partitions | 28 | 28 | Using the whole drive |
| Hard Drives | A | A | Copy and compare data files. |
| Availability of Degraded RAID | D | A | Remove one HDD from the running system on Hotplug type. |
| Rebuild of Degraded RAID | D | A | Rebuild automatically on Hotplug type. |
| I/O access running | 12h | 12h | I/O access running |
| Reboot | 10 | 10 | The number of times. |
| Basic operation | UP |
| Checklist | Result | Comment |
|---|---|---|
| X Window System | A (*1) |
1024x768, thousands colors. |
| Mouse/keyboard | A | On text console |
| Built-in LAN ports | A | ssh and ftp |
| CPU information | A | check dmesg |
| Memory information | A | check dmesg |
| Maximum CPUs | 2 | Number of physical CPUs. |
| Maximum Memory | 32 (*2) |
Size of Main Memory. (GB) |
| Optical disk drive | A | Copy and compare data files. |
| Floppy drive | A | |
| Serial port | A | Configure to login. |
(*1)
(*2)
- Install packages, which are gnome2-2.26.0 and xorg-7.4.1.
- Exec following commands.
# Xorg -configure
# cp xorg.conf.new /etc/X11/xorg.conf- Edit /etc/X11/xorg.conf and add following line at Section "ServerLayout".
Option "AllowEmptyInput" "off"- Edit /etc/X11/xorg.conf and add refresh rate at Section "Monitor".
ex)
HorizSync 40-50
VertRefresh 50-70- Edit ~/.xinitrc and add following line.
exec gnome-session- Edit /etc/rc.conf and add following lines.
dbus_enable="YES"
hald_enable="YES"
- Restart system.
- startx
i386 GENERIC kernel can recognize up to 4GB memory.
| Hardware Addition | UP |
| Model/Device | Result | |
|---|---|---|
| Hard drive (HDD) | 2.5inch SAS | A |
| 2.5inch SATA | A | |
| 2.5inch SSD | A | |
| 3.5inch SATA | A | |
| go back | UP |