| Express5800/GT110e-S | |
| Distribution | Ubuntu 12.04.1 LTS (amd64) ( KERNEL 3.2.0-29 ) |
| Meanings of letters |
| A ---Function without third party drivers B ---Function with third party drivers C ---Not function D ---Not supported blank---Not tested |
| OS Installation / Basic operation |
| Model | UP |
| Code | Model |
|---|---|
N8100-1884Y N8100-1885Y |
Express5800/GT110e-S 3.5inch HDD model (Air-cooled model) Intel®Pentiun® G640 (2.80GHz 2C/2T) Intel®Xeon® E3-1220v2 (3.10GHz 4C/4T) |
N8100-1886Y N8100-1887Y |
Express5800/GT110e-S 2.5inch HDD model (Air-cooled model) Intel®Pentiun® G640 (2.80GHz 2C/2T) Intel®Xeon® E3-1220v2 (3.10GHz 4C/4T) |
N8100-1888Y N8100-1889Y |
Express5800/GT110e-S 3.5inch HDD model (Water-cooled model) Intel®Core® i3-3240 (3.40GHz 2C/4T) Intel®Xeon® E3-1265Lv2 (2.50GHz 4C/8T) |
N8100-1941Y | Express5800/GT110e-S 2.5inch HDD model (Water-cooled model) Intel®Xeon® E3-1265Lv2 (2.50GHz 4C/8T) |
| OS Installation | UP |
-Hardware configuration
| Configuration | Drive | Outline |
|---|---|---|
| 1 | RAID 2.5/3.5-inch drive |
N8103-149 RAID Controller(512MB, RAID0/1) Additional HDD |
| 2 | RAID 2.5/3.5-inch drive |
N8103-150 RAID Controller(512MB, RAID0/1/5/6) Additional HDD |
| 3 | RAID 2.5/3.5-inch drive |
N8103-151 RAID Controller(1GB, RAID0/1/5/6) Additional HDD |
| 4 | RAID 2.5/3.5-inch drive |
N8103-167 RAID Controller(1GB, RAID0/1/5/6) Additional HDD |
| 5 | SATA SSD/HDD 2.5/3.5-inch drive |
Additional HDD |
| Checklist | Result | Comment | |
|---|---|---|---|
| Conf1,2,3,4 | Conf5 | ||
| OS installation | A (*1) |
A (*1,3,4) |
Boot from distribution's CD/DVD media. |
| Making partitions | 14 | 14 | Using the whole drive |
| Availability of Degraded RAID | A | D | RAID 0 is exempt. |
| Rebuild of Degraded RAID | A | D | RAID 0 is exempt. |
| I/O access running | 12h | 12h | The running time |
| Reboot | 10 (*2) |
10 (*2) |
The number of times. |
(*1)
Please set to disable the Power Conservation drivers. If you do not do this, various defects, such as failure to start occurs.(*2)
- When you see "Finish the installation", move to console by Alt + F2.
- Add 2 lines to target/etc/modprobe.d/blacklist.conf as follows.
blacklist mei
blacklist acpi_power_meter
- Return to the installer by Alt + F1 or Alt + F7, then finish the installation.
The following message is registered in the syslog on each boot.
"pci0000:Xf: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d"
(*3)
If the graphical installation, in the partitioning screen, you must confirm and set to install the grub on /dev/sda.
(*4)
Uninstall gnome-disk-utility that incorrectly detects a hard drive failure.
# apt-get remove gnome-disk-utility
| Basic operation | UP |
| Checklist | Result | Comment |
|---|---|---|
| X Window System | A | 1024x768, thousands colors. |
| Built-in LAN ports | A | ssh and ftp |
| CPU information | A | cat /proc/cpuinfo |
| Memory information | A | cat /proc/meminfo |
| Optical disk drive | A | Copy and compare data files. |
| Serial port | A | Configure to login. |
| Remote Management | A (*1) |
EXPRESSSCOPE Engine (Integrated remote media and KVM over IP) *You need a license key for these functions. |
(*1)
Remote media may not be recognized by the system in rare cases. We restored it by restarting the system.
| go back | UP |